PTN MTX Series Manual de usuario descargar pdf (Pagina 21)

MTX Series Matrix Switcher

PTN Electronics Limited www.PTN-electronics.com

“Output Channel”: press the number of output channels to be controlled

6.3 Examples of Operation

Example 1：To transfer the signal of ID”1” from input channel No.1 to output channel

No.3,4

1, Press the “1” from the ID selection menu.

2, Press the button for input channel number“1”

3,Press the button for the first output channel number “3”

4, Press the button for the second output channel number “4”

Then, switching OK ! the signal of ID”1” is switching from “1” to “3” and “4”

7. Communication Protocol and Command

Codes

7.1 RS232 codes of regular switching (not including the MXPA8)

With this command system, the RS232 software is able to control and operate the MTX Matrix with

remotely.

Communication protocol:

Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none

Commands: Description

/*Type;

Check the system information and ID information.

/%Lock;

Lock the keyboard of the control panel on the matrix.

/%Unlock;

Unlock the keyboard of the control panel on the matrix.

/^Version; Inquire the version of firmware. (refer to Detail example 4)

/:MessageOff;

Switch off the feedback command from the com port. It will only show “switcher OK”.

(refer to Detail example 5)

1342

AV AudioVideo

342

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

PTN MTX Series Manual de usuario Pagina 21